Getting Started

1. Check to make sure you have everything that should be in the kit
   • Three sets of goggles with two controllers each and the Inseego network device
2. Setup the Inseego network device
   • Plug the device into a wall outlet and wait for a green light (4G internet speed) or a blue light (5G internet speed)
3. Loop the controllers around each wrist
4. Put on the goggles
   • Turn the black dial counter-clockwise to make the head strap larger
   • Put the goggles on
   • Turn the black dial clockwise to re-tighten the head strap (goggles should be snug but not too tight)
5. Turn on the goggles
   • Turn on the battery and the goggles using the button on top of the battery and the button on the side of the goggles
6. Confirm the floor level
7. Set the operating boundary
   • Draw a boundary for the participants to say within (recommend at least 6.5ft by 6.5ft)
   • If you don't have the recommended space, or a participant who needs to remain seated, you can choose a stationary boundary
8. Check the WiFi Connection
   • The goggles should automatically connect to the Inseego device
   • If the Inseego device can't get a signal (red light), you can connect to a local WiFi network
9. Choose a scenario
   • Career Exploration 2.0 will usually use classroom code CR2U
   • Career Exploration Facility should automatically login and you only have to accept the usage agreement